Ensure correct behavior of canvas with createPattern + fillRect with shadow.

On success, you will see a series of "PASS" messages, followed by "TEST COMPLETE".


PASS successfullyParsed is true

TEST COMPLETE
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is 255
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is 255
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is 255
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is around 51
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is around 51
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is around 51
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is around 141
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is around 113
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is around 51
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is around 29
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is around 23
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is around 29