Ensure correct behavior of canvas with fillRect shadow

On success, you will see a series of "PASS" messages, followed by "TEST COMPLETE".


FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is 255
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is 255
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is 255
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is 255
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is around 76
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is around 76
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is around 76
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is around 76
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is smaller than 25
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is smaller than 25
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is smaller than 25
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is smaller than 25
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is smaller than 10
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is smaller than 10
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is smaller than 10
FAIL d[0] should be 255. Was 0.
PASS d[1] is 0
FAIL d[2] should be 0. Was 255.
PASS d[3] is smaller than 10
PASS successfullyParsed is true

TEST COMPLETE